Welcome InMyPi Forum / Guestbook

Luberth Sat 2 Mar 2019 at 18:03:20
LM2596 DC-DC Voltage Regulator Adjustable Step Down Power Supply

LM2596 DC-DC Voltage Regulator Adjustable Step Down Power Supply Module Display


i bought this for 2.89 euro and i like it
handy if you have DC transformers with a to high DC voltage for your need
wide range of DC input / DC output voltage at 2 ampere

range 0-40V. (Note: Make sure that the supply voltage of 4 volts and higher for the accuracy of the voltmeter)
Press the button to switch the measurement LED display to input or output voltage
Press the touch button for three seconds to turn off the LED display
Input 4,0-40V (input voltage to the output voltage must be higher than 1.5v).
The adjustable output voltage range of-1.25 volts is 37V continuously adjust (the input voltage must be higher than the output voltage up to a height of about 1.5V)
The maximum output current up to 3A
Normal and stable operational current of 2A

3d print a case for this pcb


End of Message, Thanks For Viewing! ☺
Tip: if your watching on your phone or tablet ⁝ add / save to homescreen and you get a nice icon its Free!
Tip: on your computer or laptop do not forget to bookmark this page its Free!
BookMark ShortCut Keys press ctrl+d on your keyboard



Reply to this Message


, <code> <b> <i> <u> .


Design a Bit like ForumOne 4.0 WayBack 1999 ©
Always Read the Small print?!

http://forum.luberth.com - - http://www.luberth.com/forum/

Thank You!

Domoticz/#/Floorplans Co2 FootPrint of this RaspBerry Pi 3B+ DeskTop PC & WebServer